Syrus Cloud Connect 3G (SL3G-1645)
SYRUS 3G SL-1645 is an intelligent tracking hub with Expanded Interoperability for Fleet Automation. This unit has both: 2G Quad-band & 3G Penta-band GSM/GPRS modules with superior GPS sensitivity. It has all the functionalities and features of previous SL series devices and its key features include: motion, shock and aggressive driving detection, acceleration backlog, ultra low power consumption, and outstanding accessories compatibility.
Location and tracking
Syrus Cloud Connect 3G (SL3G-1645) is embedded with GPS and 3G chips. It doesn’t support Assisted GPS (A-GPS) technology. It uses Cell ID location (also known as LBS-tracking) as the back-up, when no satellites signals are available.
Mobile networks
Quad-band GSM module makes devise usable all over the world where 2G networks are supported.
UMTS/HSPA+ is supported.
Features
Key features of the SL3G-1645 device are:
- Intelligent configurable event engine, easy setup, reports up to 3 different actions per event.
- Turn by turn reports to guarantee the best possible tracking resolution.
- Motion detector, shock, and aggressive driving detection
- Molex automotive type connector.
- TCP and/or UDP and/or SMS/SMPP communication protocols supporting up to 5 different IP or DNS destination servers and up to five SMS telephone Numbers.
- Binary and/or ASCII GPS protocols.
- Full audio/voice port for two-way communication.
- Store and forward: 7.200 events.
Interfaces
SL3G-1645 is equipped with multiple inputs and outputs.
Offering 3 inputs, 1 ignition input, 1 ADC input, 1 one-wire input, and 2 outputs, makes it ideal to control, manage and monitor fuel sensors, doors, panic buttons, vehicle immobilizer, siren, lights, driver identification with Dallas keys or any other compatible telematics application.
Also, it has serial port RS232 (DB9) for easy integration with any external device like mobile data terminals, barcode scanners, satellite modems or RFID tag readers.
Power supply
The external power supply range might be 8V – 32V, which makes it possible to install Syrus 2G both on cars and vans.
DCT Syrus 2G also features an internal backup battery (380 mAh) that allows up to 6 hours of device work.
The manufacturer also claims reverse polarity protection and thermal shutdown for enhanced battery life, as well as automatic power saving mode based on the status of the ignition input and motion detector.
Local and remote management
SL3G-1645 tracker is fully configurable over the network via GPRS and/or SMS commands. Also, operational firmware can be upgraded over the air (FOTA), as well as over the RS232 port.
Server connection
| EU platform | tracker.navixy.com (52.57.1.136) |
| US platform | tracker.us.navixy.com (13.52.37.2) |
| Server port | 47732 |
| Auto registration | Yes |
General information
| Purpose | Vehicle |
| Weight | 159 g (5.61 oz.) |
Connectivity information
| Network signal level | Yes |
| Network operator ID | Yes |
Location information
| GNSS signal level | Yes |
| LBS | Yes |
| Forced GNSS location update over GPRS | Yes |
| Forced GNSS location update over SMS | Yes |
| Forced LBS location update over GPRS | Yes |
Features
| Remote outputs control | Yes |
| Odometer | Yes |
| Hardware key | Yes |
Interfaces
| Discrete inputs | 8 |
| Number of outputs | 6 |
| Analog sensor | Yes |