menu

Albatross S8.5

Más de Albatross

Albatross s6

Albatross s6

Albatross S8.5

Albatross S8.5

Albatross S8.5 Terminal allows you to connect modules to support advanced transport fleet managing projects; full logistic data reading from the bus CAN/FMS/J1708/OBDII; remote driver cards DDD downloads and mas memory; read drivers status from the bus D8; communication and transport management on a connected GARMIN (FMI) navigation.

Mostrar más

Features:

  • CAN module – reads data from the CAN bus (J1939, J1708, J1587, FMS) – over 550 vehicles supported! (Full CAN module description on a separate data sheet)
  • GSM/GPRS Module: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
  • GPS Quectel L10/L70 receiver with ANTY-JAMMING function
  • Advanced filters of analog inputs (analog floats; fuel probes) with data support after the loss of the main power supply
  • External active GPS antenna (3 meter / SMA connector)
  • External quad band antenna (3 meter / SMA-RP connector
  • Internal sustaining clock RTC (Real Time Clock)
  • External RS-232-TTL (optional; RS-232, RS-485)
  • Internal battery 550 mAh (optional); Charging control
  • ABS casing: 89x63x30 [mm]
  • Memory archive – minimum of 24.000 events (up to 48.000)
  • Signaling operation diodes of GSM and GPS
  • Full support of 1-Wire DALLAS protocol (6 thermometers, DALLAS / RFID identification)
  • Alarm, which informs that the GPS antenna is dissconnected – real-time monitoring
  • Operating a dedicated Albatross Wi-Fi module which enables a communication between GPRS-S8 terminal and a communicator / tablet using Wi-Fi networks
  • Full support for Mobileye technology
  • Full solutions support MIDAS MOVON
  • Authoring solution of protecting inputs of the device (power; ignition switch; analog inputs) – these inputs are damage resistant (e.g surge in vehicle installation)
  • Incremental firmware – backward compatible always contains all the device functions , which ensures ease of managing software versions; Files to update are delivered directly to a partner in order to further updates by using the FTP server
  • Optional support of 3D sensor in order to detect accident; tows; car cullets
  • ImmoDALLAS – an additional security for customers vehicle. The device activates the output in case of detecting the absence of authorization (DALLAS, RFID); The device allows you to save up to 256 identification numbers of drivers!
  • Ignition signal detection using a dedicated analog input, the main power supply voltage or from CAN bus
  • Ability to implement a dedicated logic functions; commands and a help of handling modules on partners demand in case of further cooperation

Applications:

  • Vehicle Real-time Tracking
  • Vehicle Data Warehouse
  • Vehicle Security / Rescue / Anti-hijack
  • Mobile Asset Tracking
  • Fleet Management
  • Location Based Service

Inputs / Outputs

  • 2 reacting to mass inputs
  • 2 open collector outputs
  • 3 analog inputs (for ignition voltage measurement; fuel probes)
  • 1-Wire Input (identification of drivers; temperature measurement; DALLAS, RFID)
  • RS-232-TTL communication port (default)
  • RS-232 communication port (optional)
  • RS-485 communication port (optional)
  • Counting input
  • CAN J1939 / J1708 / J1587 / FMS / OBDII / TACHO

Conexión del servidor

Servidor de la UEtracker.navixy.com (52.57.1.136)
Servidor de USAtracker.us.navixy.com (13.52.37.2)
Puerto de servidor47699
Auto registro

Información general

FinalidadVehículo
Peso110 g (3.88 oz.)

Información de ubicación

Nivel de señal GNSS

Características

Control remoto de las salidas
Odómetro
Lectura del identificador del conductor

Interfaces

Entradas digitales5
Número de salidas2
Sensor analógico
Active un dispositivo en la plataforma Probar
¿No ha encontrado su dispositivo? Podemos añadirlo Integrar
Video telemática ¡NUEVO!
Open
Video telemática ¡NUEVO!
Verifique incidentes
Determine responsabilidades
Entrene conductores
Leer más >
Open