Carscop CCTR-830
Carscop CCTR-830 is an OBDII-type tracker, that can be is easily installed into diagnostic port of a car. GPS tracker takes power from it but it can not read OBDII data.
Location and tracking
Carscop CCTR-830 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.
OBDII data
CCTR-830 can’t read any data from OBDII port. But it supports «Check engine» (MIL) and DTC error codes reading by SMS.
Mobile networks
With Quad-band GSM/CDMA 2G module Carscop CCTR-830 can be operated all over the world.
Power supply
Carscop CCTR-830 uses OBDII Connector Type B and voltage range 9-40V, which makes possible to install it both on cars and trucks.
CCTR-830 also features a built-in rechargeable backup battery. When fully charged it ensures about 1-2 hours of device operation (in normal conditions).
Local and remote management
Carscop CCTR-830 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
LED Indication
Carscop CCTR-830 has two LEDs
- Green LED indicates GSM/GPRS mode
- Red LED indicates GPS reception
Conexión del servidor
| Servidor de la UE | tracker.navixy.com (52.57.1.136) |
| Servidor de USA | tracker.us.navixy.com (13.52.37.2) |
| Puerto de servidor | 47735 |
| Auto registro | Sí |
Información general
| Finalidad | Vehículo |
| Peso | 60 g (2.12 oz.) |
Conectividad
| Nivel de señal | Sí |
| ID del operador | Sí |
Información de ubicación
| Nivel de señal GNSS | Sí |
| LBS | Sí |
Características
| Odómetro | Sí |
Interfaces
| Entradas digitales | 2 |