GoSafe G1S
GoSafe G1S has unique design and power standard which allows users to chose between replaceable or rechargeable batteries. Powered by CR123 replaceable batteries with total capacity of 6000mah which have enough power to send one message a day for three years. G1S is designed in such a way that it can also take the rechargeable batteries and can be charged via external power connector.
Location and tracking
GoSafe G1S model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology as well. It uses Cell ID location (also known as LBS-tracking) as the back-up, when no satellites signals are available.
Mobile networks
With a Quad-band GSM module G1S can operate all over the world where 2G networks are supported. 3G version supports 3G networks as well.
Features
Key features of the GoSafe G1S device are:
- 6000 mAh battery
- Intelligent Power Management
- IP 67 Rating
Power supply
External power supply range might be 3-5V.
GoSafe G1S also features an optional rechargeable 6000 mAh backup battery. When fully charged it ensures up to 6 months of device operation.
Local and remote management
GPS tracker GoSafe G1S can be fully controlled over GPRS, including configuration of tracking modes and outputs control. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
LED Indication
G1S has three LEDs
- LED indicating GPS reception
- LED indicating GSM/GPRS reception
- LED indicating Power status
Server connection
EU platform | tracker.navixy.com (52.57.1.136) |
US platform | tracker.us.navixy.com (13.52.37.2) |
Server port | 47771 |
Auto registration | Yes |
General information
Purpose | Vehicle |
Weight | 160 g (5.64 oz.) |
Connectivity information
Network signal level | Yes |
Network operator ID | Yes |
Location information
GNSS signal level | Yes |
LBS | Yes |
Features
Remote outputs control | Yes |
Odometer | Yes |
Interfaces
Discrete inputs | 1 |
Number of outputs | 1 |
Analog sensor | Yes |