AMGPS T-1100
Mais de AMGPS

AMGPS BT-100

AMGPS G-500

AMGPS LTB-2

AMGPS Echo-SI

AMGPS COTR-A

AMGPS G1000-HD

AMGPS G3000

AMGPS G-500HD

AMGPS BYK-TRACK

AMGPS Standard

AMGPS Deluxe

AMGPS Engine Kill

AMGPS Motorcycle

AMGPS OBD-200

AMGPS AST-100

AMGPS AST-200

AMGPS AST-400

AMGPS OBD-C100

AMGPS Mini C

AMGPS HV-100

AMGPS Mini C2

AMGPS HF-Talk

AMGPS Stealth

AMGPS MOTO-1000

AMGPS Echo D/E

AMGPS SOS

AMGPS OBD DG1 12V

AMGPS Freko

AMGPS VGPS-3100

AMGPS VGPS-3200

AMGPS VGPS-4100

AMGPS Personal

AMGPS Smart Lock

AMGPS Portable Pro

AMGPS Mika G1

AMGPS Echo NS

AMGPS EZE Tracker

AMGPS OBD-i500

AMGPS G-1000

AMGPS Sat Pro 2000

AMGPS OBD-1000

AMGPS G-2000

AMGPS SAT Pro 1000

AMGPS SAT Pro 1000-S

AMGPS T-1100

AMGPS BT-100

AMGPS G-500

AMGPS LTB-2

AMGPS Echo-SI

AMGPS COTR-A

AMGPS G1000-HD

AMGPS G3000

AMGPS G-500HD

AMGPS BYK-TRACK

AMGPS Standard
AMGPS T-1100 is marketed by the manufacturer as light real-time tracking terminal. It works with GPS and GLONASS systems and it is able to connect to GSM networks. It can be used for the work's optimization of fleet management also transport companies as well as for personal needs.
This GPS tracker has an internal GSM and GPS/GLONASS antennas and is able to catch not the strongest signals. Also, T-1100 has a smart power consumption system that can extend the life of the built-in battery in deep sleep mode.
It is operating in different roaming networks and due to a smart algorithm of GPRS connections help to save the traffic.
Package contents
Package content depends on order code, and can be customized by customer needs.
The standard package contains:
- Input and output power supply cable with a 2×5 connection pins
- USB cable
- A card containing URL to download FM1120 device drivers and Configurator software
- Integrated 170mAh Li-ion rechargeable battery
Location and tracking
T-1100 model is embedded with GPS chip and also it has the support of GLONASS. It doesn’t support Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
The tracking mode is flexible configured: by moving every 100m, and every 60 sec, and on turning on 30 degrees by default. When there is no movement (detected by “Ignition” status), tracker sends data every 180 seconds.
Mobile networks
T-1100 has a quad-band GSM 2G module, so it can be operated all over the world.
Interfaces
T-1100 model features such interfaces as
- 1 Digital Input Reserved for Ignition Status Monitoring
- 2 Digital Inputs
- 1 Analog Input (10V or 30V range)
- 2 Digital Open-collector Outputs (connecting external relays, LED, buzzers etc.)
- 1-Wire® temperature sensor
- 1-Wire® iButton
- Motion sensor
- USB Port
Power supply
T-1100 uses and voltage range 10-30V, which makes possible to install it both on cars and trucks. Device also features an optional built-in rechargeable backup battery. When fully charged it ensures about 1 hour of device operation (in normal conditions).
“Ignition” status
There is a virtual “Ignition” flag in T-1100 which is determined by either:
- External power voltage – when the power level falls below a certain configured level (by default 13V), the “Ignition” is considered to be OFF, otherwise – ON.
- Digital Input #1 – if there is positive signal on DIN #1 of the socket, the “Ignition” flag is ON.
- Acceleration sensor – when the built-in accelerometer detects movement, the “Ignition” flag is ON.
“Stop/Movement” mode
AMGPS T-1100 determines whether vehicle is on move or stopped by one of three methods (configurable by user):
Method | Moving | Stopped |
by Board Voltage | If board voltage exceeds certain level (configurable, 13V by default) | If board voltage is lower than a certain level |
by Acceleration | Internal accelerometer detects movement | Internal accelerometer does not detect movement |
by GNSS | GNSS is fixed and speed is above 5 km/h | GNSS is fixed and speed is below 5 km/h or GNSS is not fixed |
Two sleep modes
T-1100 is able to go to Sleep mode after configurable Sleep timeout. This timeout (defined period) starts counting when device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, device goes to normal sleep or deep sleep mode:
- Normal sleep mode. While in normal sleep mode, T-1100 turns GNSS module OFF, but keeps GSM module ON. The device is not making any new periodic GPS records, just monitoring the events with the last known coordinates and sends them to tracking server. As a result power consumption decreases allowing saving vehicle’s battery (below 2 mA).
T-1100 exists normal sleep mode when “Movement” mode detected or “Ignition” switches on.
- Deep sleep mode. While in deep sleep mode, T-1100 sets both GNSS receiver and GSM/GPRS module to OFF state, thus making impossible to wake up the device remotely. Battery consumption drops below 2 mA.
T-1100 exits deep sleep mode if at least one of following conditions is true:
- “Movement” mode is detected
- “Ignition” is turned on
- USB cable is connected
Harsh driving behaviour
T-1100 features “Green Driving Scenario” that helps to inspect driver about harsh driving. Scenario continuously monitors: accelerating force, braking force and cornering angles. When these parameters exceed configured thresholds, Green Driving event is generated and sent to server
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
- “Ignition” flag (see above) is turned on
- Vehicle speed is equal or higher than 10 km/h
Harsh cornering is monitored only when following conditions are fulfilled:
- “Ignition” flag (see above) is turned on
- Vehicle speed is equal or higher than 30km/h
Local and remote management
AMGPS T-1100 tracker can’t be controlled over GPRS, though it supports firmware updating via GPRS (FOTA). However, there is a wide list of SMS commands in a ASCII format, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS. To decrease the amount of SMS required for configuration SMS in binary format can be also used.
You can also configure T-1100 from a PC using proprietary software (Teltonika Configurator) and standard USB-cable which is included into package.
LED Indication
T-1100 has two status LEDs:
- Status LED: indicates GSM/GPRS mode
- Navigate LED: indicates GPS reception
Conexão do servidor
Servidor da UE | tracker.navixy.com (52.57.1.136) |
Servidor dos EUA | tracker.us.navixy.com (13.52.37.2) |
Porta do servidor | 47776 |
Auto cadastro | Sim |
Informação geral
Propósito | Veículo |
Peso | 80 g (2.82 oz.) |
Conectividade
Status do roaming | Sim |
Nível do sinal | Sim |
ID do operador | Sim |
Informações de localização
Nível de sinal GNSS | Sim |
LBS | Sim |
Localização forçada pelo GNSS em preferência ao GPRS | Sim |
Localização GNSS forçada em preferência ao SMS | Sim |
Caracteristicas
Controle remoto das saídas | Sim |
Hodômetro | Sim |
Acelerômetro | Sim |
Leitura de ID do motorista | Sim |
Controles extras do Navixy
Fonte da ignição Movimento não autorizado Parâmetros de condução áspera |
Interfaces
Entradas digitais | 3 |
Número de saídas | 2 |
Sensor analógico | Sim |
Campos de entrada
AVL IO: #1-100000 CAN: Acelerador CAN: Carga do motor CAN: Combustível (Litros) CAN: Combustível: #1 CAN: Consumo de combustível CAN: Consumo total de combustível CAN: Horas do motor relativas CAN: Horas do motor CAN: Quilometragem relativo CAN: Quilometragem CAN: RPM CAN: Taxa do combustível instantâneo CAN: Temperatura do motor CAN: Velocidade Quilometragem Sensor analógico: #1 Temperatura externa: #1-3 Voltagem da cartão |
Campos de status
CAN: Bolsa de Ar CAN: Capuz CAN: Cinto de segurança do motorista CAN: Cinto de segurança do passageiro CAN: O freio de mão está ativado CAN: Porta-malas CAN: Porta Chave de hardware Código do evento OBD: Erros OBD: Estado do MIL (verificar motor) |
Monitoramento de eventos
Alteração de estado de tarefa Bateria fraca Condução excessiva Condução áspera Corte de energia externa Desvio da rota Deteção de estado de estacionamento Distância entre objetos Entrada ou saída da área demarcada Entradas provocando Excesso de tempo estacionado Invasão da geofence criada automaticamente Motor em marcha lenta excessiva Mudança de motorista Mudança de nível de combustível Parâmetro no intervalo Porta aberta em modo de alarme Pressionar o botão SOS Relatório de localização sob demanda Saídas de acionamento Tracker desligado ou conexão perdida Valor do campo de Estado Velocidade excessiva (relacionado ao hardware) Velocidade superior Verifique o motor (MIL) |