menu

Cellocator Cello-CANiQ

Cellocator Cello-CANiQ is a fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others.

Mostrar mais

Location and tracking

  • GPS
  • Continious tracking mode

Mobile networks

  • GSM 850/900/1800/1900 MHz
  • UMTS 900/2100 MHz

Power supply

  • Build-in battery (Li-Ion Polymer, 1000 mAh)
  • External power supply (9… 32 V DC)

Inputs and outputs

  • 1 internally pulled down input dedicated for ignition switch
  • 1 internally pulled up Discrete Dry input with assignable functionality and configurable threshold for logical high and low states.
  • 2 configurable inputs capable of serving as:
    Frequency counters – configurable resolution; Up to 5kHz input signal; signal level (3V < Vin ≤ 30V), accuracy ±2%
    Analog inputs with variable resolution – 8bit, adapted to 0-2.5V signal, resolution 20mV, accuracy ±20mV; 8bits, adapted to 0-30V
  • 4 general purpose open drain outputs (250mA max) with assignable functionality.

Other features

  • Local management
  • Accessories
  • DTC (Diagnostic Trouble Codes) support
  • Above 2000 complementary vehicle libraries (reverse engineering)
  • Classic Bluetooth & BLE support (external adaptor).
  • Configurable real-time and on-board powerful logic engine over vehicles parameters
  • Mobileye support via CANBUS interface
  • Simultaneous connectivity K-line and CANBUS
  • PointerCept ready – a solution combining Hybrid RF variants in addition to cellular communication.

Conexão do servidor

Servidor da UEtracker.navixy.com (52.57.1.136)
Servidor dos EUAtracker.us.navixy.com (13.52.37.2)
Porta do servidor47718

Informação geral

PropósitoVeículo
Peso110 g (3.88 oz.)

Conectividade

Status do roamingSim
Nível do sinalSim
ID do operadorSim

Informações de localização

Nível de sinal GNSSSim
LBSSim
Localização forçada pelo GNSS em preferência ao GPRSSim

Caracteristicas

Controle remoto das saídasSim
HodômetroSim
Leitura de ID do motoristaSim

Interfaces

Entradas digitais8
Número de saídas8
Sensor analógicoSim
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate