GPS Tracker
Vehicle
Integrated
Queclink GB100
QueclinkQueclink GB100 is a device designed for self-installation by a customer. It simply mounts directly onto the vehicle’s battery with only two wires to attach. This approach allows for either a very low cost installation or for the insurance customer to self-install. Its built-in GPS receiver has very high sensitivity, a fast time to first fix and supports 1Hz (every second) location sampling during vehicle motion.
Server connection
| EU platform | tracker.navixy.com (52.57.1.136) |
| US platform | tracker.us.navixy.com (13.52.37.2) |
| MENA platform | tracker.me.navixy.com (34.166.104.189) |
| Server port | 47764 |
| Auto registration | Yes |
Interfaces
| Digital inputs | 1 |
Technical details
Protocol
- Canonical name
- micron
- Default port
- 47764
- Slug
micron_47764
Hardware I/O
- Digital inputs
- 1
- Digital outputs
- 0
- Output control
- none
- Track control
- Supported
Supported interfaces(2)
Capabilities(15)
Altitude
APN Settings
Auto Registration
Board Voltage
Digital Inputs
Gprs Location Request
GSM Lbs
GSM Lbs Location Request
GSM Signal Level
Local Time Issue
Location Request
Motion Sensor
Odometer
Satellites
Sim Card
Alert rules(24)
Backup Battery Low
Battery Off
Crash Alarm
Distance Control
Excessive Driving
Excessive Parking
GPS Damp
GPS Lost Recover
GSM Damp
Harsh Driving
Idling
Idling Soft
In Out Zone
Input Change
Offline
Parking
Power On
Route
Sensor Range
SOS
Speedup
State Field Control
Task Status Change
Track Change
(em) = emulated at platform level rather than native on the device.
Sensor & data inputs(6)
You might also consider
Related devices sharing similar capabilities, interfaces, or use cases.
